Home

Click Here to Search

SU061W

Network Scan Settings

You can connect your scanner or printer to a network to share it among multiple computers or scan images into a specified computer.

Important

  • Multiple users cannot scan at the same time.

Note

  • Complete the network settings of your scanner or printer beforehand using the Setup CD-ROM.

  • With network connection, scanning takes longer than USB connection.

Complete the following settings to enable scanning over a network.

Specifying Your Scanner or Printer

Use IJ Network Scanner Selector EX to specify the scanner you want to use. By specifying the scanner, you can scan over a network from your computer or the operation panel.

Important

  • If the product you want to use is changed with IJ Network Scanner Selector EX, the product used for scanning with IJ Scan Utility changes as well. The product for scanning from the operation panel also changes.

    If your scanner or printer is not selected in IJ Scan Utility, check that it is selected with IJ Network Scanner Selector EX.

    Refer to "IJ Network Scanner Selector EX Menu and Setting Screen" for your model from Home of the Online Manual for details.

  • To scan from the operation panel, specify your scanner or printer with IJ Network Scanner Selector EX beforehand.

  1. Check that IJ Network Scanner Selector EX is running.

    If IJ Network Scanner Selector EX is running, its icon appears in the notification area of the taskbar.

    figure: Taskbar icon
    Note

    • If the icon is not displayed in the notification area of the taskbar, from the Start menu, select All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX.

      The icon appears in the notification area of the taskbar, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3.

  2. In the notification area of the taskbar, right-click the IJ Network Scanner Selector EX icon and select Settings....

    figure: IJ Network Scanner Selector EX menu

    The Scan-from-PC Settings screen appears.

  3. Select your scanner or printer from Scanners.

    Normally, the MAC address of your scanner or printer is already selected after the network setup. In that case, you do not need to select it again.

    figure: Scan-from-PC Settings screen
    Important

    • If multiple scanners exist on the network, multiple model names appear. In that case, you can select one scanner per model.

  4. Click OK.

Note

  • The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan-from-Operation-Panel Settings screen as well.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.

    Starting IJ Scan Utility

  2. Select "Canon XXX series Network" (where "XXX" is the model name) for Product Name.

    figure: IJ Scan Utility
    Note

    • For USB connection, select "Canon XXX series" (where "XXX" is the model name) for Product Name.

  3. Click Settings... to use another scanner connected to a network.

  4. Click (General Settings), then click Select in Product Name.

    figure: Settings dialog box

    The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.

    Select the scanner you want to use and click OK.

  5. In the Settings (General Settings) dialog box, click OK.

    The IJ Scan Utility main screen reappears. You can scan via a network connection.

Setting for Scanning from the Operation Panel

You can make the setting for scanning from the operation panel.

Important

  1. Check that IJ Network Scanner Selector EX is running.

    If IJ Network Scanner Selector EX is running, its icon appears in the notification area of the taskbar.

    figure: Taskbar icon
    Note

    • If the icon is not displayed in the notification area of the taskbar, from the Start menu, select All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX.

      The icon appears in the notification area of the taskbar, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3.

  2. In the notification area of the taskbar, right-click the IJ Network Scanner Selector EX icon and select Settings....

    figure: IJ Network Scanner Selector EX menu

    The Scan-from-PC Settings screen appears.

  3. Click Scan-from-Operation-Panel Settings.

    figure: Scan-from-PC Settings screen

    The Scan-from-Operation-Panel Settings screen appears.

  4. Select your scanner or printer from Scanners and click OK.

    Select the MAC address of your scanner or printer.

    figure: Scan-from-Operation-Panel Settings screen
    Note

    • When multiple scanners are connected via a network, you can select up to three scanners.

  5. Return to the Scan-from-PC Settings screen and click OK.

    figure: Scan-from-PC Settings screen
Note

  • If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again.

    • MP Drivers is installed

    • Network settings of your scanner or printer is completed after installing the MP Drivers

    • Network communication between your scanner or printer and computer is enabled

    If your scanner or printer still does not appear, see "Problems with Network Communication" for your model from Home of the Online Manual.

Page top